Inconel 601®

Chemical Analysis

C

.1 max

MN

1.0 max

S

.015 max

Si

.5 max

Cr

21.0 -25.0

Ni

58.0- 63.0 min

Co

1.0

Al

1.0- 1.7

Fe

6.0- 10.0 max

Inconel 601® - UNS N06601
Werkstoff Nr. 2.4851

Common Trade Names: Inconel 601®, Pyromet® 601, Nicrofer® 601

Inconel 601® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 601® also has high strength and good workability. Inconel 601® can be hardened and strengthened only by cold work. Inconel 601®can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays.

Inconel® 601 sheet is available in thicknesses ranging from .010 to .120". Inconel® 601 strip in coil from is available in lighter gauges up 24" wide. Inconel® 601 plate is available up 2" thick.

Inconel® 601 bar is available in wrought bar up to 3" diameter and larger sizes and shapes may be forged to order.

Inconel® 601 seamless pipe is available up to 4" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 601 tubing is not commonly available, but can be produced to order. Redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

Butt-weld and forged fittings are available or can be manufactured with short lead times.

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.