Alloy 617 - UNS N06617
Common Trade Names: Inconel 617®, Nicrofer® 617
Inconel 617®consists of nickel-chromium-cobalt and – molybdenum. These elements make Inconel 617® highly resistant to oxidation and carburization. Inconel 617®can be easily fabricated; it can be hot formed up to 2200º F, and cold formed at 1900º F. Inconel 617® has excellent weldability. Inconel 617® is used for ducting, transition liners in both aircraft and land based gas turbines, and combustion cans.
Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
 |
|
|---|---|
Sheet/Plate content |
ASME SB-168 AMS 5888, AMS 5889 |
Round Bar/Wire content |
ASME SB-166 AMS 5887 |
Pipe content |
|
Tube content |
|
Fittings content | |
Forgings content |
ASME SB-564 AMS 5887 |
 | |
|---|---|
C (Carbon content) |
.05 - .15 |
| MN | 1.0 max |
| P | |
| S | .015 max |
Si |
1.0 max |
Cr |
20.0 -24.0 |
Ni |
44.5 min |
Mo |
8.0 - 10.0 |
Cu |
.5 max |
Co |
10.0 - 15.0 |
| Cb+Ta | |
Ti (Titanium contenet) |
0.6 max |
Al (Aluminum content) |
.8 - 1.5 |
Fe (Iron content) |
3.0 max |
| B | .006 max |