Inconel 600® - UNS N06600
Werkstoff Nr. 2.4816

Common Trade Names: Inconel 600®, Nickelvac® 600, Ferrochronin® 600

Inconel 600® is a standard engineering material and has a great resistance to heat and corrosion. Inconel 600® also has high strength and can be easily formed. Inconel 600® can be hardened and strengthened only by cold work. Inconel 600® can be used in the heat-treating industry for muffles, furnace components, and for heat-treating baskets and trays.

Inconel® 600 sheet is available in thicknesses ranging from .016 to .156". Inconel® 600 strip in coil from is available in lighter gauges up 24" wide. Inconel® 600 plate is available up 3" thick.

Inconel® 600 bar is available in wrought bar up to 9" diameter and larger sizes and shapes may be forged to order.

Inconel® 600 seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 600 tubing (welded & seamless) is available up 3". Inconel® 600 redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity.

Butt-weld and forged fittings are available or can be manufactured with short lead times.

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

International Specifications	BS 3072-3076 (NA14) DIN 17742, DIN 17750, DIN 17754 WERKSTOFF Nr 2.4816 TÜV 305 AFNOR-NC 15 Fe
Sheet/Plate content	ASTM B168, AMS 5540
Round Bar/Wire content	ASTM B166, AMS 5665
Pipe & Tube content	ASTM B167, ASTM B829, ASTM B517, ASTM B775, ASTM B163, ASTM B516, ASTM B751, AMS 5580
contentFittings	ASTM B366
contentForgings	ASTM B564, AMS 5665
Weld Wirecontent	AWS A5.14 ERNiCr-3, AWS A5.11 ENiCrFe-3

C (Carbon content)	.15 max
MN	1.0 max
P
S	.015 max
Si	.5 max
Cr	14.0 -17.0
Ni	72.0 min
Mo
Cu	.5 max
Co
Cb+Ta
Ti (Titanium contenet)
Al (Aluminum content)
Fe (Iron content)	6.0 - 10.0